FURTHER PRODUCT INFORMATION
INSTRUCTIONS FOR USE:
The DLX P-40 undercoat plastering mix is supplied as a ready to use product. It cannot be mixed with other materials, diluted or thickened. Stir the mass directly before use to improve consistency. Apply the DLX P-40 mix on the base prepared in advance (evenly across the entire surface) using a roller or brush. Do not apply the mass at the temperature below
+5 °C. You can plaster the surface after the mass dries off completely, i.e. after about 5-6 hours of the application.
An average consumption is about 0.2 L per 1 sq. m.
NOTE: Protect eyes and skin. Seek medical advice on direct eye contact.
STORAGE AND TRANSPORT:
Transport and store in a tightly closed original container (preferably on pallets), in dry conditions at the temperatures above zero. Protect against overheating. Do not leave cut into and open containers.
PROTECT AGAINST FROST!
12 months from the manufacture date stated on the container.
MANUFACTURING DATE/COLOUR: stated on the container.
5 L bucket; 72 bucket pallet, 360 L;
10 L bucket; 44 bucket pallet, 440 L.
||water dispersion, synthetic resins and mineral fillers
||white or colour
||about 1.4 kg/dm3
||+ 50C to + 250C
||about 4 hrs
||About 0.2 L/m2 depending on the substrate absorption
||ETA 15/0311 dated 29/05/2015